Home
- Belegger.nl: steun en toeverlaat voor beleggers. Bekijk de beurskoersen, de laatste stand van de AEX en lees het nieuws, de columns en de adviezen.
Koersen
- Aandelen
- Indices
- Valutas
- Rentes
- Commodities
- Certificaten
- Opties
- Futures
- Beleggingsfondsen
- Trackers
- Obligaties
- Hefboomproducten
Nieuws
Forum
Analyse & advies
Thema's
- Beurstips en handelskansen
- Fondsen & ETF's

Beurscodes, betekenis en hulp bij zoeken

Europa

AEX: Euronext Amsterdam
BRU: Euronext Brussels
PSE: Euronext Paris
LIS: Euronext Lissabon
CHX: CBOE Europe, grote(re) EU aandelen
NAV: Investment Funds (NAV)

Noord-Amerika

NYS: New York Stock Exchange
OTC: CBOE BZX Exchange (US)
TSE: Toronto Stock Exchange

Kunt u een instrument niet vinden?

Zoek dan via de zogenaamde ISIN code. Elk instrument, aandeel etc. heeft een unieke code.

Kies vervolgens - wanneer er meerdere resultaten zijn - de notering op de beurs van uw keuze.

Waar vind ik die ISIN code?

Google de naam van het instrument, aandeel etc. met de toevoeging 'ISIN'.

Als zoeken op ISIN code geen resultaten oplevert hebben wij het instrument of aandeel niet in onze koersendatabase.

Market Monitor

Koffiekamer « Terug naar discussie overzicht

3D printing

6.208 Posts, Pagina: « 1 2 3 4 5 6 ... 293 294 295 296 297 298 299 300 301 302 303 ... 307 308 309 310 311 » | Laatste

Omlaag ↓

voda 11 april 2022 07:44

DOD Building 3D-Printed Barracks in America

Strategic Research Institute
Published on :
11 Apr, 2022, 6:30 am

US’s Defense Department, in partnership with the private sector, is building three transient training barracks using advanced 3D printing technology. The project, which is being spearheaded by the Defense Innovation Unit, is expected to be completed within 10 months. At more than 5,700 square feet each, these barracks will each be the largest 3D-printed structures in the Americas. The barracks will be the first 3D-printed structures that comply with the DOD's newly released Unified Facilities Criteria for additive concrete construction, which provides guidance for DOD construction.

Previously, the Unified Facilities Criteria did not include specifications for 3D-printed concrete wall systems, preventing any companies that used this novel approach to construction from bidding on DOD construction projects and preventing DOD from leveraging the efficiencies gained from this technique. This change to UFC by DOD's Structural Discipline Working Group further enhances the technology transition led by the U.S. Army Engineer Research and Development Center and DIU to leverage commercial innovation and incorporate novel, timesaving manufacturing methods within the DOD.

ICON, a construction technology company based in Austin, Texas, was selected to do the work. The company had previously done 3D construction work with DIU for the Marine Corps. Also, in 2021, the Texas Military Department partnered with ICON to design and 3D print an innovative training barracks at the Camp Swift Training Center in Bastrop, Texas.

The material used in the barracks construction is ICON's proprietary Lavacrete, which is a type of high-strength concrete with a compressive strength of 2,000 to 3,500 pounds per square inch. This material can withstand extreme weather and greatly reduce the impact of natural disasters, while providing maximum efficiency. It can be printed at high speeds while retaining form, enabling structures to be built faster while keeping construction projects on schedule and on budget, according to ICON. Also, the building material will last longer than traditional construction materials and methods, according to ICON.

Bijlage:

nobahamas 20 april 2022 13:16

PyroGenesis Provides Corporate Update on Aluminum Business Line

www.globenewswire.com/news-release/20...

MadMushroom 25 april 2022 13:36

PyroGenesis Confirms Successful Site Acceptance Testing of Three Drosrite™ Systems in Operation
ceo.ca/@nasdaq/pyrogenesis-confirms-s...

mjmj 25 april 2022 13:52

hoe nieuw is dit nieuws?

voda 27 april 2022 07:32

GE Renewable Energy Opens 3D Printing Plant for Wind Towers

Strategic Research Institute
Published on :
27 Apr, 2022, 6:30 am

GE Renewable Energy has held a ribbon-cutting ceremony to inaugurate a new research and development facility that will conduct research on how to 3D print the concrete base of towers used in wind turbines. The research will enable GE to 3D print the bottom portion of the wind turbine towers on-site at wind farms, lowering transportation costs and creating additional employment opportunities at the wind farms where the technology will be used.

The research being conducted in the Bergen facility is supported in part by a grant from the US Department of Energy. A team of 20 people will continue to work on optimizing the 3D printing technology with first applications in the field anticipated within the next five years.

GE Renewable Energy Chief Technology Officer Danielle Merfeld, who spoke at the event, said, “Innovation will continue to be a key driver in accelerating the energy transition. It is particularly important to continuously improve the ways we design, manufacture, transport, and construct the large components of modern wind farms. We appreciate the support of the US Department of Energy for the research we are doing here and are confident it will help make the wind farms of tomorrow even more efficient, economical, and environmentally responsible.”

The research being done at the Bergen, NY facility will enable GE to better serve the growing US wind power market. The American Clean Power Association reports that there are more than 68,000 wind turbines across the country are generating clean, reliable power. Wind power capacity totals 135 GW, making it the fourth-largest source of electricity in the country. GE Renewable Energy was recognized by ACPA as the top manufacturer of wind turbines in the US in 2021 for the fourth year in a row.

Bijlage:

MadMushroom 28 april 2022 13:33

En we doen er nog eentje bij...

PyroGenesis Confirms Successful Site Acceptance Testing of Additional Drosrite™ System in North America
pro.ceo.ca/@nasdaq/pyrogenesis-confir...

voda 4 mei 2022 07:20

Alquist 3D Prints Homes in Virginia

Strategic Research Institute
Published on :
04 May, 2022, 6:30 am

3D-printed-home builder Alquist 3D announces Project Virginia–the world’s largest 3D-printed construction project in the world: 200 homes around Virginia. Alquist will kick off this project with a demonstration near the site of the first two 3D-printed homes in Pulaski in Virginia. Project Virginia follows the success of Alquist’s recent Habitat for Humanity project in Williamsburg in Virginia, the first owner-occupied, 3D-printed home in the world. The three-bedroom, two-bath home Alquist built for Habitat for Humanity took only about 22 hours to print the exterior shell. That’s at least 2-3 weeks less than the standard construction schedule, cutting nearly 15% off of costs. 3D printing also enables builders to use less lumber, a huge benefit since lumber availability and prices have been highly volatile.

Alquist’s mission is to solve the housing crisis in rural and underserved areas of America. The company uses the most advanced 3D-printing technology, Black Buffalo 3D's NEXCON printer, to lower the cost of housing and infrastructure in economically distressed and under-served communities. Alquist chose Pulaski because demand for housing is soaring there thanks to the more than 3,000 new jobs Volvo, Blue Star Manufacturing, and American Glove Innovations will create in the area. Also, Virginia’s New River Valley was recently identified as having one of the highest growth rates in the nation for tech jobs in the US. Those companies’ workers will need affordable homes near their jobs and Alquist is equipped to provide unique, affordable housing that these workers and their families will love.

Printing a house is just like printing on paper, only supersized. The ink is reinforced concrete, which is layered one row at a time as a home’s exterior walls are printed. 3D-printed walls can be built in days instead of weeks

Bijlage:

Sub!et 6 mei 2022 07:50

Applicants
HPQ-SILICON RESOURCES INC. [CA]/[CA]

patentscope.wipo.int/search/en/detail...

Transforming Silicon Slag into High-Capacity Anode Material for Lithium-Ion Batteries

ecs.confex.com/ecs/241/meetingapp.cgi...

Sub!et 7 mei 2022 08:13

The Innovation Platform spoke to Bernard Tourillon, Chairman, President and CEO of HPQ Silicon, to find out more about the company’s plans to manufacture high-value silicon and silica-based technologies.

www.innovationnewsnetwork.com/exploit...

Sub!et 11 mei 2022 14:25

CEO Peter Pascali of PyroGenesis, Presents at the Q2 Investor Summit
10 mei 2022

youtu.be/tnQ1v-UVSOY

Sub!et 13 mei 2022 08:27

Few thoughts

posted on May 12, 2022 09:39PM
Log in to use the IP Check tool [?]

1) Today HPQ filed on SEDAR the Management information circular for the upcoming AGM when shareholders will be able to allow us to complete the final step required to become a Tier 1 Technology issuer. This is a big milestone for us...

Point 2) No news does not mean that management is hiding bad news, it just means that we have nothing to report. If we had bad news that would be material and we would have to report it immediately. Now as it pertains to the end of the commissioning of the QRR, I have noticed that FUD posters and some shareholders are getting restless because we have gone further than the 3-4 weeks Peter mentioned. The fact is that I talk about a timeline of weeks, and for me, that means anytime up to two months after the April 5 press release. The commissioning is a binary event, until it is finished, it is not and since nothing negative is happening, I don't see a reason for us to issue an update press release to come with another tentative timeline.

Regards

Bernard Tourillon

haas 13 mei 2022 08:53

quote:
voda schreef op 11 april 2022 07:44:
DOD Building 3D-Printed Barracks in America

Strategic Research Institute
Published on :
11 Apr, 2022, 6:30 am

US’s Defense Department, in partnership with the private sector, is building three transient training barracks using advanced 3D printing technology. The project, which is being spearheaded by the Defense Innovation Unit, is expected to be completed within 10 months. At more than 5,700 square feet each, these barracks will each be the largest 3D-printed structures in the Americas. The barracks will be the first 3D-printed structures that comply with the DOD's newly released Unified Facilities Criteria for additive concrete construction, which provides guidance for DOD construction.

voor LT
DDD op $ 9,00 gekocht
MTLS op de $14.00 idem

tot over 3 jaren:)

voor geinteresseerden in de hele branche is mss PRNT ETF iets: houd aandelen in 66 bedrijven
PRNT 3D Printing ETF

Following
7.33K followers
$21.76
www.bing.com/search?q=prnt&pc=0BL...

voda 18 mei 2022 07:25

GE Makes Investment in COBOD International

Strategic Research Institute
Published on :
18 May, 2022, 6:30 am

GE Renewable Energy has announced a minority investment in COBOD International, the company providing the 3D printer used at the Bergen research facility. Officials from both companies said the investment will build on an existing relationship with COBOD International, a leading player in 3D construction printing solutions, first undertaken in 2019. COBOD is experiencing double digit growth and the global market leader within 3D construction printing with more than 50 3D construction printers sold world-wide. Financial details on the investment were not disclosed.

The two companies participated in a ribbon-cutting ceremony to inaugurate a new research and development facility in Bergen, New York last week that will conduct research on how to 3D print the concrete base of towers used in wind turbines. The research, the first of its kind research in the US, will enable GE Renewable Energy to develop new production methods to make wind turbine towers more efficient and sustainable.

Wind-turbine towers is not the only non-residential low-rise application for COBOD’s technology. COBOD’s printers are also known for having printed both offices in Denmark and Austria, schools in Africa, two and three story houses and apartment buildings in Germany as well as concrete structures for the oil & gas industry, made in cooperation with EPC’s (Engineering, Procurement Contracting companies).

Bijlage:

Sub!et 19 mei 2022 21:46

OWNERSHIP OF THE PUREVAPTM QUARTZ REDUCTION REACTOR PILOT SYSTEM TRANFERED TO HPQ SILICON
• Insurance to cover its $6.2 Million replacement cost secured
MONTREAL, Canada, May 19, 2022 — HPQ Silicon Resources Inc. (“HPQ” or the “Company”) (TSX-V: HPQ) (OTCQX: HPQFF) (FWB: UGE), an innovative silicon solutions and technology development company, would like to inform shareholders that with the forthcoming start of the final phase of the PUREVAPTM Quartz Reduction Reactor (RRQ) Research and Development program, and the imminent completion of the commissioning of the pilot system, time has arrived for the ownership of the pilot system to be transferred to HPQ-Silicon from PyroGenesis Canada Inc. (TSX: PYR) (NASDAQ: PYR).
The plan as always been to transfer the ownership of the pilot systems from PyroGenesis to HPQ Silicon prior to the reactor start, since under the terms of the July 2016 agreement, HPQ-Silicon, is the sole party entitled to claim R&D credits associated with the PUREVAPTM QRR pilot plant system operations.
Transferring the ownership required HPQ-Silicon to purchase insurance to cover the $6.2 million 2022 replacement cost, estimated by PyroGenesis, of HPQ PUREVAPTM QRR pilot system. Based on PyroGenesis updated quotation, one thing is very clear, prices have increased significantly since the July 2016 signing of the agreement. HPQ paid, as per the 2016 agreement, $4,240,000 for design, fabrication and commissioning the pilot system. Current replacement cost is $6.2 million for the fabrication and commissioning of a new pilot system.
HPQ CEO Bernard Tourillon commented: “It may have taken time to get here, but the decision to enter early into a long term and mutually beneficial relationship with PyroGenesis to harness the potential of new silicon materials manufacturing will soon come to fruition. 2022 and beyond are going to be years for Silicon and our unique and innovative processes of manufacturing and commercializing silicon and nanosilicon materials needed for an ESG-demanding industrial landscape is one of our greatest strengths going forward.”
About PyroGenesis Canada Inc.
PyroGenesis Canada Inc., a high-tech company, is a leader in the design, development, manufacture and commercialization of advanced plasma processes and sustainable solutions which reduce greenhouse gases (GHG) and are economically attractive alternatives to conventional “dirty” processes. PyroGenesis has created proprietary, patented, and advanced plasma technologies that are being vetted and adopted by multiple multibillion dollar industry leaders in three massive markets: iron ore pelletization, aluminum, waste management, and additive manufacturing. With a team of experienced engineers, scientists and technicians working out of its Montreal office, and its 3,800 m2 and 2,940 m2 R&D and manufacturing facilities, PyroGenesis maintains its competitive advantage by remaining at the forefront of technology development and commercialization. The operations are ISO 9001:2015 and AS9100D certified, having been ISO certified since 1997. For more information, please visit: www.pyrogenesis.com

nobahamas 20 mei 2022 10:05

Paris, February 22, 2022, 8:40 am
PRESS RELEASE
Airbus, Safran and Tikehau Ace Capital sign a Memorandum of
Understanding with Eramet for the joint acquisition of Aubert & Duval

Gisteren eerste levering van 100 kg TiAl poeder aan Aubert & Duval door Pyrogenesis...

Sub!et 20 mei 2022 12:45

quote:
nobahamas schreef op 20 mei 2022 10:05:
Paris, February 22, 2022, 8:40 am
PRESS RELEASE
Airbus, Safran and Tikehau Ace Capital sign a Memorandum of
Understanding with Eramet for the joint acquisition of Aubert & Duval

De afronding van de deal wordt pas verwacht in het vierde kwartaal van 2022.
De voorgestelde transactie is onderworpen aan overleg met de relevante werknemersvertegenwoordigende organen en alle noodzakelijke goedkeuringen van de regelgevende instanties.

De drie zijn van plan om 100% van Aubert & Duval te verwerven via een nieuwe gezamenlijke maatschappij die specifiek voor deze transactie zou worden opgericht en waarin ze gelijke eigendomsrechten zouden hebben.
Aubert & Duval is een strategische leverancier van kritieke onderdelen en materialen voor een aantal veeleisende industriesectoren, met een jaaromzet van ongeveer € 500 miljoen en een personeelsbestand van ongeveer 3.600 werknemers, voornamelijk in Frankrijk.
Het bedrijf heeft end-to-end capaciteiten in speciale materialen en superlegeringen, evenals opkomende expertise in titanium, die van cruciaal belang zijn voor ruimtevaart-, transport-, energie- en defensietoepassingen.
Deze overname zou Airbus en Safran in staat stellen om de strategische toeleveringsketen voor zichzelf en voor andere klanten veilig te stellen, en om nieuw materiaal te ontwikkelen.
Het sluit ook aan bij de initiatieven die de afgelopen jaren zijn genomen om de toeleveringsketen van de Franse lucht- en ruimtevaartindustrie te ondersteunen, en met name de oprichting, met de hulp van de Franse staat, van het Ace Aéro Partenaires-fonds dat wordt beheerd door Tikehau Ace Capital.
Gezien hun industriële expertise in metallurgie, zal Safran het operationele management van het bedrijf leiden. Het transformatieprogramma zal het vertrouwen van de klant versterken en een sterke Franse industriële basis die in staat is om wereldwijde markten te bedienen.”

nobahamas 20 mei 2022 15:07

Canadese beurs maandag gesloten

nobahamas 20 mei 2022 16:08

Lijkt me een goed moment voor een short-squeeze
( Pyrogenesis)

mjmj 24 mei 2022 22:03

quote:
nobahamas schreef op 20 mei 2022 16:08:
Lijkt me een goed moment voor een short-squeeze
( Pyrogenesis)

nog weinig van te zien...

R dayhigh 24 mei 2022 23:25

pro.ceo.ca/@nasdaq/pyrogenesis-announ...

PyroGenesis Announces Project with Leading Furnace Manufacturer to Incorporate Plasma Torches in Aluminum Scrap Remelting Furnaces

6.208 Posts, Pagina: « 1 2 3 4 5 6 ... 293 294 295 296 297 298 299 300 301 302 303 ... 307 308 309 310 311 » | Laatste

Aantal posts per pagina: 20 50 100 | Omhoog ↑

Meedoen aan de discussie?

Word nu gratis lid of log in met uw e-mailadres en wachtwoord.

Direct naar Forum

Markt vandaag

AEX	860,01	-5,35	-0,62%	18:05
AMX	921,43	-5,17	-0,56%	18:05
ASCX	1.182,36	-7,47	-0,63%	18:05
BEL 20	3.827,75	+1,17	+0,03%	18:05
Germany40^	17.712,30	-125,10	-0,70%	21:32
US30^	37.851,00	-162,46	-0,43%	20:47
US500^	4.960,72	-88,53	-1,75%	20:58
Nasd100^	17.004,48	-544,32	-3,10%	20:52
Japan225^	37.028,48	-973,23	-2,56%	20:58
WTI	82,19	+0,11	+0,13%	21:31
Brent	87,21	+0,22	+0,25%	21:32
EUR/USD	1,0653	+0,0009	+0,09%	21:32
BTC/USD	64.387,73	+799,96	+1,26%	21:29
Gold spot	2.393,58	+14,21	+0,60%	21:32