Arcelor Mittal « Terug naar discussie overzicht

Nieuws en info hier plaatsen (deel 4)

voda
0
BHP Highlights that Steel Profitability Sweet Spot Could Be Over

Strategic Research Institute
Published on :
18 Aug, 2022, 6:50 am

Global mining giant BHP while announcing results for FY 2022 has opined that if the profitability sweet spot is over, and this is a point of uncertainty, we are back in a world of significant tradeoffs. BHP’s Market Analysis & Economics Vice President Dr Huw McKay wrote “The abrupt ending to the strong run of profitability across calendar 2021 and the March quarter of 2022, which had provided a fillip to a number of struggling mills after some very tough few years both prior to the pandemic and then in calendar 2020, could have far–reaching consequences. Improving cash flow had enabled a tangible acceleration of deleveraging efforts and boosted shareholder returns. It may also have sparked more ambitious Decarbonisation efforts, the financing of which has always been a question mark in this traditionally low margin sector.”

Dr McKay wrote “The first half of calendar 2022 has seen YoY growth rates between China and the ROW converge, after smoothing for the lumpy base effects that afflict YoY calculations.”

Dr McKay wrote “Six months ago, we wrote that our starting point for thinking about calendar 2022 is that a continuation of China’s policy stance of zero growth ought to be the baseline, with scenarios built around that. A fourth year above 1 billion tonnes accordingly seems likely, as the nation’s plateau phase extends. Since we penned those words, the authorities have moved the goalposts on the annual production target, shifting from zero–growth to a net reduction, while remaining silent on the scale of said reduction. There have also been moving parts to reconcile across end–use sectors, feedstock availability and disrupted trade flows, among others. The net impact of these forces on the statement above is that it still feels broadly valid, but the ultimate route to those ends will be a circuitous and volatile one.”

Dr McKay wrote “Broad–based strength across the majority of Chinese end–use sectors in the first half of calendar 2021 gave way to a near universal softening in the second half. Housing starts were particularly weak, and they have remained that way in calendar 2022 to date. Infrastructure has been the lone true bright spot, with other major non–housing sectors (transport and machinery) experiencing shallow contractions. Knowing that information and adding it to the reality of the record run–rates seen in the same half a year ago, it would be reasonable to guess that steel production would have been deeply negative YoY in the first half of calendar 2022.”

Dr McKay added “We estimate that net exports of steel–contained finished goods account for slightly more than 10% of Chinese apparent steel demand. That is a lower degree of external exposure than, say, Japan or Germany, where the number is about one–fifth. An additional 4% or so of Chinese production is exported directly. The direct trade surplus in steel has fluctuated widely since the pandemic began. It fell into deficit in the middle of calendar 2020, and then rebuilt quickly back towards pre–pandemic levels in the middle of calendar 2021. With an eye to their commitment to restrain growth in total steel production, the authorities stepped in at this point, cancelling export VAT rebates for most steel products and removing import tariffs for semi–finished steel. Net exports recorded a 41 million tonne per annum outcome for the whole year, with a run–rate of 31 million tonne per annum in the second half. The surplus then jumped again in the first half of calendar 2022, aided by the disruptions in the FSU, with the month of June-2022 recording a sizeable surplus of 84 million tonne per annum up 68% YoY, and the whole first half coming in at 52 million tonne per annum.”

Dr McKay concluded “The exact trajectory of annual production run–rates that will achieve this near doubling of the stock is uncertain. Our base case remains that Chinese steel production is in a plateau phase in the current half decade, with the literal peak to be the cyclical high achieved in this phase, with 1065 million tonne in 2020 being the clubhouse leader in golfing terms. Strategically speaking, it is the plateau concept, not the peak concept that matters now. Having attained and sustained 1 billion tonne plus run–rates for three years going on four, defining the literal peak year and/or level is no longer anything more than a tactical question.”
voda
0
Mr Scindia Deep Dives to Fathom Integrated Steel Mills Issues

Strategic Research Institute
Published on :
18 Aug, 2022, 6:50 am

India’s Union Minister of Steel & Civil Aviation Mr Jyotiraditya M Scindia chaired meeting of the Advisory Committees formed for Integrated Steel Plants, which was attended by the captains of Indian steel industry. Mr Scindia tweeted “Undertook a deep-dive into issues facing the steel sector & charted a path ahead towards resolving them during a meeting with the advisory group on Integrated Steel Plants.”

Steel Ministry has formed the Advisory Committee to ensure active participation of stakeholders on issues and possible course of action directly from the stakeholders, to ensure success of steel sector.
voda
0
Indian HRC surges following recent deal conclusions
183 Views

Following recent deal conclusions in Vietnam and the Gulf Cooperate Council, Indian mills have hiked their hot rolled coil offers on the back of surging production costs. This hike, however, looks unworkable for buyers as the majority of re-rollers are having trouble selling their galvanized coil in the US, Kallanish notes.

Initial quotes for 2mm+ SAE 1006 HRC have surged this week to $650-660/tonne cfr GCC, equating to $600-610/t fob India. This follows a deal for 40,000-50,000 tonnes of HRC concluded by a major tier-1 Indian mill last week at $620-625/t cfr GCC.

According to a source, buyers reportedly received offers at as high as $670-680/t cfr GCC on Wednesday.

“This hike is hypothetical, as the only market left for Indian HRC is the GCC, and hiking offers here against very low demand will not work for India,” opines a trading source. “This usually happens during the second, third week of each month, when Indian mills start negotiations in the GCC.”

Structural grade HRC offers to Europe are heard at $670-680/t cfr Italy and $700/t cfr Antwerp. Meanwhile, offers for DC-01 grade CRC fell marginally to $785-790/t cfr Antwerp and 1mm Z275 grade zinc-coated galvanized steel offers are heard at $990-1,000/t cfr Antwerp.

"Europe has become a difficult market for India ... mainly because of boron addition," says a source. "Tube- and pipe-makers are hesitant to book Indian boron-added material, and service centres have also reduced their intake. India can get acceptance from re-rollers but they also have ample inventories left."

A tier-1 Indian mill sold 30,000t of SAE 1006 HRC at $580-590/t cfr Vietnam for September shipment last week. Following this deal, Indian offers reportedly surged to $600-615/t cfr Vietnam for October shipment. Hoa Phat recently revised it domestic HRC offer to $595/t ex-works, which makes Indian offers unworkable for Vietnamese buyers.

Sources inform of receiving enquiries for HRC from Egypt but, owing to the dollar shortage there, these have not translated into deals. Moreover, Egyptian traders are heard buying Russian cargoes at comparatively lower prices.

Indian mills have sold a good quantity of HRC to Nepal at $630-640/t cpt Raxual. Offers in the domestic market fell to INR 57,000-57,500/t ($718) ex-Mumbai.

A majority of Indian mills have costlier coking coal inventory which was procured in May and June at $600/t cfr India levels. However, subdued global demand, coupled with inflation at a microeconomic level, continues to pose a threat to any price hike by Indian mills.

Moreover, back-to-back consecutive price drops by Vietnamese domestic HRC mills are further restricting India’s roll out of higher offers there.

Market participants continue to question the viability of Indian HRC offers in the export market, especially when there is very limited acceptance of Indian boron-added material. Mills, on the other hand, are seen standing firm on their price hikes and are hesitant to soften their offers, except for large-quantity deals.

Sayed Aameer India
voda
0
Metinvest’s Zaporizhstal to Automate Steel Plates Cutting

Strategic Research Institute
Published on :
19 Aug, 2022, 6:06 am

Ukrainian steel maker Metinvest’s Zaporizhstal steel plant has started repairing the rolling table BTLS-1680 in order to install gas cutters on it to automate plate cutting. Zaporizhstal workshop and Metinvest Promservis specialists repaired electric motors, restored cable lines and rolling table power cabinets during the repair work. A single line rolling table control scheme was also designed and implemented, also repairs and replacement of rollers and deformed inter-roller wires were carried out.

Located in the city of Zaporizhzhia & founded in 1933, Zaporizhstal is Ukraine's fourth-largest steel maker with an annual capacity of 4.5 million tonnes of steel, 3.3 million tonnes of hot metal and 4.1 million of finished steel products. After the collapse of the USSR and the independence of Ukraine, the mill fell into the hands of the Ukrainian government. When privatization began in the mid-1990s, Mr Vasily Khmelnytsky was named manager of the state's stake in the plan. The Ukrainian government began offering shares in Zaporizhstal in cash auctions in 1999. By 2001, Vasyl Khmelnytsky and a consortium led by the Midland Group controlled 93% of the mill. Metinvest eventually became full owners of the mill in 2013.
voda
0
Thyssenkrupp Schulte Offers Sustainable Solutions for Components

Strategic Research Institute
Published on :
19 Aug, 2022, 6:08 am

The time-consuming and complex calculation of the CO2 footprint poses a major challenge for many companies. Thyssenkrupp Schulte has developed two new solutions for making supply chain transparent and proving the carbon footprint of their products as information on the life cycle assessment can be a decisive criterion for awarding contracts. For a small additional fee, customers with the greenability carbon tracking variant receive full transparency about the CO2 Footprint of their purchased finished or semi-finished parts and components. In the so-called cradle to gate plus end of life approach, both the procurement process and the entire supply chain are examined and the data collected is supplemented with information from licensed databases in a TÜV-certified process.

Customers who want to go one step further can choose the greenability carbon compensation option. The determined CO 2 footprint is compensated here. To do this, the customer selects an independently verified compensation project, in which the sum of the consumed CO2 value is invested. The parts and components can then be described as climate neutral and carry the corresponding greenability label.

The greenability offer from thyssenkrupp Schulte is a further step on the way to a sustainable materials and services business.

Headquartered in Essen, Thyssenkrupp Schulte is part of thyssenkrupp Materials Services and is the leading materials dealer and service provider for steel, stainless steel and non-ferrous metals in Germany. A network of more than 40 locations serves customers from various sectors of the manufacturing sector, including industry, trade and the construction industry. The portfolio ranges from a wide range of flat products, profiles and tubes to competent technical advice and a comprehensive range of services along the value chain.
voda
0
Owen Steel to Expand Richland County Steel Processing Center

Strategic Research Institute
Published on :
19 Aug, 2022, 6:09 am

Columbia South Carolina based Owen Steel is investing USD 3 million for expansion of their 440,000 square-foot plant on Bluff Road in Richland County in Columbia by installing automated machinery for processing of steel structures.

Owen Steel was founded in 1936 in Richland County and has grown into one of America's premier structural steel contractors, building some of the most recognizable structures of skylines across the nation. Owen Steel has been involved in construction projects across the Midlands and the United States. These include the Darla Moore School of Business at the University of South Carolina, Nephron Pharmaceuticals in West Columbia, the new Delta terminal at LaGuardia Airport and 3 World Trade Center in New York and the iconic guitar-shaped Hard Rock Hotel and Casino in Fort Lauderdale in Florida.
voda
0
BaoSteel’s TISCO Establishes Stainless Steel Precision Standard

Strategic Research Institute
Published on :
19 Aug, 2022, 6:12 am

Chinese steel giant BaoSteel announced that the national standard for Stainless Steel Precision Foil, drafted by Shanxi TISCO Stainless Steel was released recently. The market for stainless steel precision foil has been growing rapidly in recent years. The product is often in short supply in the high-end fields, especially in areas such as OLED flexible screens and new energy vehicle battery cladding materials. However, companies in downstream industries often follow their own standards or inter-enterprise technical agreements in the procurement of such materials. In order to regulate the market of this emerging field as early as possible and promote the high-quality development of the whole industry chain, TISCO actively applied for the project of standard making, developed the standard, and brought it to fruition.

The release of this standard ended the history of no national standard in the field of stainless steel precision foil in China. In order to further promote the influence of TISCO in the international market, the standard preparation team will, as its next step, actively promote the release of the foreign language version of the standard.
voda
0
Al Yamamah Steel Profits Dented by Raw Material Volatility

Strategic Research Institute
Published on :
19 Aug, 2022, 6:13 am

Riyadh headquartered Saudi Arabian rebar producer Al Yamamah Steel has posted a 58% YoY drop in net profit after Zakat and tax to SAR 69.72 million during the first nine months of fiscal year 2021/2022, versus SAR 167.75 million. Sales amounted to SAR 1.14 billion in the October 2021-June 2022 period, down 11% YoY from SAR 1.29 billion. The decrease in net profit was caused due to 53% increased raw material costs, 41% lower sold quantities in the construction sector, in addition to higher financing costs.

During the third quarter that ended on 30 June 2022, the company’s net profit after Zakat and tax plummeted by 99% SAR 550,000 from SAR 65 million during the same period in the previous FY. The revenues fell by 41% YoY to SAR 237 million in April-June 2022, compared to SAR 406 million. On a quarterly basis, the net profits in Q3-21/22 shrank by 98% from SAR 35.16 million in Q2-21/22, while the sales dropped by 47.08% from SAR 448 million. Al Yamamah Steel CEO Mr Youssef Bazaid said “Q3 2021/2022 financials were weighed by the iron price cycle, which began to tumble at the beginning of the second quarter of this year and affected local demand and global iron ore prices. Q1 of this year witnessed high rises in iron ore prices, followed by a sharp drop in the second quarter of the year. This fluctuating price cycle affected the progress of work on multiple projects and delayed the awarding of some new others.”

Al Yamamah was established in 2003 to set up steel plant for an annual production of more than 1.5 million tonnes of rabars. The site of the project was strategically chosen to be on the Red Sea which is known as the highway of the shipping industry. The city of Yanbu was chosen for the project as this city is known to be the second largest Industrial City in the Kingdom after Jubail Industrial City as well as it is nearby all major cities in the kingdom. One million square meters of land was assigned for the project in Yanbu Industrial City. The construction of the first phase started in 2005 and the commissioning of the plant started in 2008 with a capacity of about 700,000 tonnes of steel bars annually.
voda
0
JSW Steel Remains Focused on Building Brands

Strategic Research Institute
Published on :
19 Aug, 2022, 6:15 am

India’s leading steel maker JSW Steel in an investor presentation has conveyed strong focus on building brands and increasing value added sales. SW Steel said that sale of value added & special products accounted for 60% of total sales in 2021-22, as against 35% in 2015-16. JSW Steel has a large portfolio of branded products

JSW Neosteel – Pure TMT Bars - Greenpro certified TMT bars. Manufactured through primary production process to ensure purity & superior quality with unique rib pattern that provides best bonding with cement

JSW Trusteel – Premium Hot Rolled Sheets - Cut-to-Length HR sheets available in wide variety of sizes and grades

JSW Galveco – Lead Free Galvanized Steel - Galvanised steel that is lead free, suited for consumer durable sector with high safety and non-hazardous-material needs

JSW Vishwas – Premium GC Sheets - Premium GC (galvanized corrugated) sheet with high durability

JSW Silveron+ - Premium Al-Zn Sheets - Premium category Al-Zn coated roofing sheets & coils with 7 year warranty

JSW Vishwas+ - Ptemun Al-Zn Sheets - Desired weight as per customer requirements with corrosion protection and enhanced durability



JSW Galvos - Premium Galvalume Coils & Sheets - Al-Zn coated coils and sheets designed for complete requirement of solar structures purlin, rafter, bracers, etc

JSW Everglow - Advanced Roofing Technology -Super premium, colour coated coils & sheets, with a 20 year warranty

JSW Colouron+ - Premium Color Coated Roofing Sheets - Premium colour coated coils & sheets, with a 15 year warranty. 3 variants - Cool Roof, Anti Dust & High Gloss

JSW Pragati + – Color Coated Sheets - High quality Al-Zn alloy & colour coated roofing sheets with anti-corrosion technology

JSW Radiance – Superior Quality Color Coated Sheets & Coils - Superior colour coated sheets for OEM customers. 6 variants - Anti Microbial, Anti Graffiti, Anti Dust, Anti Statics, Cool Roof and High Gloss

JSW Platina – Superior Quality Tinplates - Tinplate coils and sheets with high strength and formability, used in food and non-food packaging

JSW Avante - Smart Steel Doors - Steel doors designed to overcome the common issues associated with wooden doors like seasonal door jams, fire, termites and heavy-handed installation process.
voda
0
Mechel Production & Sales Results for Apr-Jun’22 Quarter

Strategic Research Institute
Published on :
19 Aug, 2022, 6:17 am

Russian steel maker Mechel General Director Mr Oleg Korzhov said “The upward trend in the average selling prices of the main raw materials and metallurgical products, which emerged in 2021, was consolidated in the 1st quarter of 2022, however, in the 2nd quarter it began to gradually weaken. In July-August prices continued their downward movement. We believe that the positive dynamics of the markets at the beginning of the year is a consequence of the recovery of global demand after several waves of the coronavirus pandemic.”

Mr Korzhov added “The metallurgical division performed stably in the reporting period, the volumes of steel production and pig iron production increased by 7% and 6%, respectively. Against the backdrop of consumer concerns about possible supply disruptions, buoyant demand for long products was observed in the 1st quarter. Starting from the 2nd quarter, due to export restrictions and a surplus in the domestic market, there has been a reverse trend. The negative dynamics of prices for almost all types of metal products is still observed. We increased sales in the long products segment by 6%. Flat steel sales decreased by 10%.”

Production April-June 2022 Quarter

Coal -3.165 million tonne, up 12% YoY

Steel – 0.924 million tonne, down 1% YoY

Sales April-June 2022 Quarter

Coking coal concentrate - 1.230 million tonne, up 45% YoY

PCI coals – 0.221 million tonne, down 6% YoY

Anthracites- 0.390 million tonne, up 36% YoY

Energy coals – 0.728 million tonne, down 14% YoY

Iron ore concentrate – 0.506 million tonne, up 37% YoY

Coke – 0.567 million tonne, down 3% YoY

Ferrosilicon - 21 kilo tonne, down 5% YoY

Long products – 0.677 million tonne, up 5% YoY

Flat products -0.102 million tonne, up 1% YoY

Hardware – 0.117 million tonne, down 16% YoY

Forged Products - 7 kilo tonne, down 46% YoY

Stampings - 14 kilo tonne, down 33% YoY
voda
0
Tata Steel Thailand Cuts Sales Target amid Falling Demand

Strategic Research Institute
Published on :
19 Aug, 2022, 6:19 am

Bangkok Post reported that falling demand for steel amid high inflation and weak purchasing power has led Tata Steel Thailand to revise down its 2022 sales target. Tata Steel Thailand CEO Mr Rajiv Mangal said “Lower steel demand in the first six months posed a challenge to Thailand’s steel consumption target for 2022. Earlier this year, we forecast domestic consumption would grow by 3-4% to around 19.5 million tonnes this year. Now it looks like the country will miss the target.”

From January to June 2022, Thailand’s steel consumption declined by 13% year-on-year to around 8.7 million tonnes, down from 10.1 million tonnes. Tata Steel Thailand expects 18.5-18.6 million tonnes of steel to be consumed in Thailand in 2022.

Tata Steel Thailand had recorded 1.33 million tonnes of steel sales in April 2021 to March 2022, a slight increase from 1.3 million tonnes in fiscal 2021 and believes that sales volumes in 2022-23 will be close to the previous year.
voda
0
CCI Clears Merger of JSW Ispat & Creixent with JSW Steel

Strategic Research Institute
Published on :
19 Aug, 2022, 6:21 am

India’s Fair trade regulator Competition Commission of India has approved the May proposal to merge Creixent Special Steels & JSW Ispat into JSW Steel. CCI tweeted “It has approved the amalgamation of Creixent Special Steels and JSW Ispat Special Products with and into JSW Steel.”

The Board of Directors of JSW Steel, Creixent Special Steels and JSW Ispat Special Products at their respective board meeting had resolved to merge JSW Ispat & Creixent Special Steels with JSW Steel in May end to achieve

1. Synergies in business

2. Optimization of raw material procurement

3. Utilization of surplus rolling capacity

4. Simplified structure and management efficiency

5. Enhancing presence in central India

6. Improved automation

JSW Ispat Special Products Limited, formerly Monnet Ispat & Energy Limited, is a special steel products manufacturer catering to the seamless pipe, automobile and high speed rail industries. It has a crude steel manufacturing capacity of 1.2 million tonnes per annum its integrated steel plant in Raigarh and its plant at Raipur.

Creixent Special Steels Limited is a joint venture between JSW Steel Limited and AION Investments Private Limited and is in the business of trading in steel and steel products and holding investments. Creixent Special Steels Limited holds equity investment in JSW Ispat Special Products Limited and is its holding company. Pursuant to the completion of the amalgamation of JSW Ispat Special Products Limited with JSW Steel, there would no longer be a requirement for Creixent Special Steels Limited to exist as a separate legal entity.
voda
0
JFE Shoji to acquire California Expanded Metal Products

Strategic Research Institute
Published on :
19 Aug, 2022, 6:23 am

Japanese steel maker JFE Group’s trading arm JFE Shoji’s subsidiary JFE Shoji America has entered into a definitive agreement to acquire all the outstanding shares of California Expanded Metal Products from the Poliquin family ownership group. The transaction is expected to close in late September 2022 following customary closing conditions and regulatory approval. California Expanded Metal Products has evolved from a single plant to four manufacturing and distribution locations in over 520,000 square feet with over 1,000 tons of daily production capacity. Post close, California Expanded Metal Products will operate identically to its current operations. CEMCO's current management structure will remain in place and will allow CEMCO to provide the same high-level of service that its customers have come to expect.

Founded in 1974, California Expanded Metal Products, which has been owned and operated by the Poliquin family since 1981, is one of the largest independent manufacturers of steel framing and lath products in the US. Founded in 1974 and headquartered in The City of Industry in California, California Expanded Metal Products has manufacturing and distribution operations in City of Industry, Pittsburg, in California; Denver in Colorado and Fort Worth in Texas. The company manufactures structural and non-structural light gauge steel framing products, metal lath, proprietary fire-air-sound products and building accessories.

Its product segments include Viper-X and ViperStud Drywall Framing Products, Metal Lath, CEMCO joint firestopping products, ProX Header, Sure-Span steel framing floor joist system, Sure-Board for shear wall panels, and water-management products along with its SFIA Code Certified steel framing products.

California Expanded Metal Products s transaction advisors included DA Davidson as sole financial advisor, DLA Piper for legal counsel, and KPMG for tax advisory. Mizuho served as financial advisor, Pillsbury Withrop Shaw Pittman as legal counsel, and Deloitte and Touche as tax and due diligence advisor for JFE Shoji America.
voda
0
SEIFSA Warns of Headwinds for Steel Industry in South Africa

Strategic Research Institute
Published on :
19 Aug, 2022, 6:24 am

The Steel & Engineering Industries Federation of South Africa has warned that the outlook for the Metals & Engineering sector has shown a marked deterioration after a strong start to the year. SEIFSA COO Mr Tafadzwa Chibanguza said “It’s been a challenging time for the metals and engineering industries recovering from the effects of the COVID-19 pandemic, unprecedented inflation, rising fuel prices, devasting floods and persistent loadshedding. Inflationary pressures were already building in the global economy, however this was initially driven by aggregate demand increasing faster than supply chains could respond. The invasion of Ukraine by Russia in February 2022 set the proverbial cat amongst the pigeons in economic and inflation termsAll businesses have been impacted by these events. The global economic outlook has deteriorated significantly since Russia invaded Ukraine. In the spectrum of leading, coinciding and lagging economic indicators, the metals and engineering sector is classified as coinciding. That is, its performance is indicative of the prevailing economic fundamentals. It is also extremely sensitive to these prevailing global and domestic economic events. Growth forecasts have been revised lower while inflation has been revised upwards. To this end, our estimates already point to production in the sector contracting by between minus 1.1-1.3% in Q2 of 2022, with notable downside risks for the full year’s outlook.”

SEIFSA said “This view is informed by number themes that are shaping the global and domestic economic fundamentals. These include the aggressive monetary policy tightening in the US, in response to multi-year record inflation outcomes recorded in that country. The on-going Russia-Ukraine war and its implications for the European Union, a concerning development is the weaponizing of gas supply by Russia to Germany, which will have recessionary consequences for Germany, the largest economy in the EU and South Africa’s second largest trading partner. The dominance of Russia and Ukraine in the food inputs and commodity complex is driving inflationary pressure globally, reinforcing the need for central banks around the world to increase interest rates. China’s aggressive zero-covid policy, in which the last round of lockdowns has affected the economic hubs of Shanghai and Beijing have contributed to a slowing global economy.”

SEIFSA added “These themes will continue to dominate the global economic narrative and the slowing of global economic growth. Steel production is highly correlated with economic growth and the early warnings signs of a slowing growth rate are evident in the reduction of iron ore prices, a key ingredient in steel production.”

SEIFSA also said “Compounding the global headwinds are weak domestic fundamentals that are also feeding into the outlook. The energy crisis, which was the worst on record in Q2 of 2022, is a major constraint and risk to the outlook. Electricity availability is an essential input into the metals and engineering sector. The sector is comprised of energy intensive users of electricity who have to cut production due to electricity curtailment. Whilst the sector also comprises producers that are less energy intensive, load-shedding causes a complete halt to operations.”

SEIFSA said “The state of local government and the lack of service delivery is another major constraint. Companies in the metals and engineering sector are spread across the length and breadth of the country and are adversely affected by service delivery failure at local government level. The inefficiencies of local government breed costs for producers eroding their competitiveness. It goes without saying that, now, more than ever before a national strategy on industrialisation is needed to stabilise and reignite the metals and engineering sector, which must include an aggressive infrastructure programme and a dedicated focus on economic reform rolled-out in partnership with the private sector.”

SEIFSA concluded “In a less supportive global economic environment with headwinds intensifying, domestic economic policy and reform has to do a lot more heavier lifting to support the economy. With a fragile global environment, a sluggish local economy, an outlook for the remainder of the year and into 2023 remaining uncertain and the prospects of things getting worse before improving now would be a good time to adopt a more frugal outlook.”
voda
0
PLI Scheme for Specialty Steel Extended till 15 September

Strategic Research Institute
Published on :
19 Aug, 2022, 6:26 am

Indian Government announced that the last date for receipt of applications under the Production Linked Incentive Scheme for Specialty Steel through the online application window has been extended up to 15 September 2022, for the fifth time. Initially, 29 March was the last date for manufacturers to apply for the benefits under the PLI scheme for specialty steel. It was later extended till 30 April, to 31 May & 30 June 2022.

Union Cabinet chaired by Prime Minister Mr Narendra Modi had approved INR 6,322-crore PLI scheme to boost the production of specialty steel in India in July 2021. The move is expected to attract an additional investment of about INR 40,000 crore and generate 5.25 lakh job opportunities.

The scheme shall be applicable for

Coated & Plated Steel Products

High Strength & Wear resistant Steel

Specialty Rails

Alloy Steel Products & Steel Wires

Electrical Steel
voda
0
Coal Minister Seeks Focus to Enhance Coking Coal Production

Strategic Research Institute
Published on :
19 Aug, 2022, 6:28 am

India’s Union Minister of Coal, Mines & Parliamentary Affairs Mr Pralhad Joshi, while addressing a workshop on Coking Coal Strategy for Indian Steel Sector, said that India needs aggressive focus on increasing coking coal production to reduce import dependence. He said “There has been increase in import of coking coal in the last few years although domestic coking coal production also increased to 51.7 million tonnes. This year in 2022-23 in the first quarter the growth in coking coal production was 26%. The coking coal block auction did not receive good response from industry and Ministry of Coal is keen to understand the issues faced by industry in this regard.

The minister urged to find technology solution and powerful strategies for using available coking coal in the country

He said that “The policy enablers are in place mainly with the amendments of MMDR Act with respect to relaxation of norms for private sector in allocation of coking coal mining blocks, exploration norms, and 50% rebate for coal gasification, among others. Government is ready to bring in place all measures to enhance coking coal production, with the abandoned coal blocks being sought from PSUs to be auctioned and rolling auction in commercial coking coal blocks.”

He also said “There are nine new coking coal washeries having capacity 30 million tonnes to be set up by Coal India Ltd and necessary infrastructure reform has been made for the same.”
voda
0
IIT Bombay & JSW to Set Up Steel Technology Hub for R&D

Strategic Research Institute
Published on :
19 Aug, 2022, 6:30 am

India's premier engineering and technology Institute IIT Bombay and India's leading business conglomerate with interests in Steel, Energy, Infrastructure, Cement, Paints, E-commerce, Sports, and Venture Capital JSW Group have entered into an exclusive strategic agreement to establish JSW Technology Hub in India for steel manufacturing in India.

IIT Bombay has created The Centre of Excellence in Steel Technology CoEST through support from the Ministry of Steel, Government of India, and other industry partners. The JSW Technology Hub will be established within the CoEST with the key objective of achieving a rapid expansion of quality steel production while maintaining carbon emissions within the target levels. The partnership with IIT Bombay will also allow JSW Group to undertake and intensify R&D efforts in the Steel sector to develop competent capabilities in the area of steel technology for the Indian conglomerate. The JSW Technology Hub will also be the nodal point for JSW Group's research activities beyond the steel domain.

1. JSW will provide financial and technical support to establish and build the JSW Technology Hub with state-of-the-art infrastructure to undertake a wide range of R&D for steel manufacturing & its use. The centre will be constructed using JSW Neosteel Rebars ranging from 8mm to 36mm diameters with Fe550D grade. IIT Bombay is expected to complete the construction of the JSW Technology Hub by FY28.

2. IIT Bombay and JSW Group will leverage the JSW Technology Hub to jointly conduct inter-disciplinary research projects and technical activities on various aspects of steel manufacturing and its use.

3. The Technical collaboration allows IIT Bombay and JSW to undertake Research and Training projects to develop patented industrial applications and solutions. JSW could decide to operationalize as well as commercialize these industrial applications in the future.

4. A Joint Steering Committee will be established with representation from IIT Bombay and JSW Steel. This Committee will steer the IITB-JSW Technical collaboration.

5. IIT Bombay will also establish the Sajjan Jindal Steel Professor Chair to enable focused training and research on new and emerging technologies in steel manufacturing. The institution of this Chair would help IIT Bombay adopt an interdisciplinary, collaborative, synergetic, and translative approach to consistently advance research and address application-oriented demands from the industry, society as well as the government. The Chair would strive to leverage the existing knowledge base and provide a platform for further innovation and scale.
voda
0
Samarco & Rogesa Join Hands for Steel Decarbonization

Strategic Research Institute
Published on :
19 Aug, 2022, 6:31 am

Brazilian iron ore miner & pellet producer Samarco and the German steelmaker Rogesa have signed a memorandum of understanding to explore technical and commercial partnerships for the supply of high quality iron ore pellets for direct reduction with the objective of contributing to the reduction of carbon emissions. Rogesa is a long-term partner of Samarco since 1978 and this initiative is important so that companies can be prepared for the future, redesigning their processes aiming the best technical solutions that reinforce sustainability.

Samarco CEO Mr Rodrigo Vilela said “Initiatives and actions to reduce CO2 are a global reality and Samarco is working to meet all established goals. Vilela also stated that Samarco has all the conditions to contribute to the global steel industry in favor of sustainability, becoming a strategic supplier also in terms of decarbonization. Samarco remains committed to pursue its purpose of making mining different and sustainable, capable to generate results and building value for society.”

Rogesa is a steel producer in Europe, a joint subsidiary of the two steel companies in Saarland, Dillinger and Saarstahl with each company holding a 50% direct and indirect share. Rogesa produces with two blast furnaces and supplies the steel plants of Dillinger and Saarstahl with hot metal. The companies are currently working on a project to build a direct reduction module in the city of Dillingen in Germany. This is an important project that aims the steel production with greater efficiency in terms of CO2 emissions.
voda
0
ACWA Power Inks MoU with POSCO for Hydrogen Production

Strategic Research Institute
Published on :
19 Aug, 2022, 6:54 am

ACWA Power has signed a memorandum of understanding with POSCO Holdings, the holding company of South Korea’s POSCO Group. The agreement will involve the joint development of green hydrogen and its derivatives such as green ammonia, to decarbonise POSCO Group’s power generation, and its steel manufacturing processes, along serving other Korean clients of POSCO Group.

Green hydrogen and ammonia produced by the partners through new green field investments will support to meet POSCO Group’s ambitious targets to produce 500,000 tonnes of hydrogen globally by 2030. POSCO Group’s output will be used in applications across diverse industries including the company’s own power generation needs, construction, energy, and support other industrial off-takers in South Korea.

As of 2021, POSCO, the steel making company of POSCO Group, has the capacity to produce 42.9 million tonnes of steel, making it the sixth largest steel producer in the world, and the largest in its home country of South Korea.
voda
0
Chinese investors plan Saudi steel mill
254 Views

China's Tianjin TEDA Investment Holding Group and Delong Steel Group's New Tianjin Steel have signed a strategic cooperation agreement this week to seek investment in steel projects in Saudi Arabia.

The two companies will carry out cooperation on developing a 10 million tonnes/year steelmaking industrial park in Saudi Arabia. This will mainly comprise an electric arc furnace-based steel plant, Kallanish learns.

New Tianjin Steel was acquired by Delong Group after bankruptcy and reorganisation in 2019. It is constructing two 1,780m³ blast furnaces in She County in Handan, Hebei Province, with a joint capacity of 3.04m t/y. The cooperation will help the steel mill expand overseas steel markets and increase the production capacity of its parent company, Delong Group.

China's TEDA Group has rich political and business resources in the Middle East, and is familiar with the overseas market development procedures of Chinese companies. Its China-Africa TEDA Company once led the development of the China-Egypt TEDA Suez Economic and Trade Cooperation Zone. In 2019, TEDA and the Saudi Authority for Industrial Cities and Technology Zones (MODON) signed a cooperation agreement to promote the investment of Chinese companies in Saudi Arabia.

Kallanish Asia
35.173 Posts, Pagina: « 1 2 3 4 5 6 ... 1575 1576 1577 1578 1579 1580 1581 1582 1583 1584 1585 ... 1755 1756 1757 1758 1759 » | Laatste
Aantal posts per pagina:  20 50 100 | Omhoog ↑

Meedoen aan de discussie?

Word nu gratis lid of log in met uw e-mailadres en wachtwoord.

Direct naar Forum

Detail

Vertraagd 16 apr 2024 17:39
Koers 23,760
Verschil -1,760 (-6,90%)
Hoog 24,370
Laag 23,550
Volume 8.435.640
Volume gemiddeld 2.286.866
Volume gisteren 2.055.736

EU stocks, real time, by Cboe Europe Ltd.; Other, Euronext & US stocks by NYSE & Cboe BZX Exchange, 15 min. delayed
#/^ Index indications calculated real time, zie disclaimer, streaming powered by: Infront