Arcelor Mittal « Terug naar discussie overzicht

Nieuws en info hier plaatsen (deel 4)

35.173 Posts, Pagina: « 1 2 3 4 5 6 ... 41 42 43 44 45 46 47 48 49 50 51 ... 1755 1756 1757 1758 1759 » | Laatste
voda
0
USS-POSCO to lay off 690 employees in California

Biz Journal reported that USS POSCO a joint venture between United States Steel Corp and a Korean company, will lay off 690 employees later this month.

According to the San Francisco Business Journal, the USS POSCO steel making plant is in Pittsburg, Calif and the layoff notice with the California Economic Development Department is effective January 14. The San Francisco Business Journal said calls to the Pittsburg, Calif., company weren't returned, and most employees weren't scheduled to return until Monday.

A US Steel spokeswoman didn't immediately return a phone call and email from the Pittsburgh Business Times seeking comment. The San Francisco Business Journal said it wasn't clear whether it was a furlough or a layoff.

The joint venture sells sheet and tin-mill products in the western United States, producing cold-rolled sheets, galvanized sheets, tin plate and tin-free steel from both United States Steel and Pohang Iron & Steel Co Ltd which is based in South Korea. Its annual production is about 1.5 million tonnes.

Source – Biz Journals
voda
0
TATA Steel acts on survey results

Action has been taken by senior managers on the TATA Steel works in Scunthorpe after an employee survey called for more face to face communication. The survey was conducted across TATA Steel Europe to hear first-hand views on leadership in the company. A company spokesman said that "The executive committee members gathered dozens of valuable comments and ideas during the employee engagement workshops across Tata Steel Europe.”

The executive said that "Clear progress is being made, taking action to address relevant and urgent items in each location. Actions speak louder than words, goes the saying.”

"That is why during the past two months, Tata Steel's managers have been working hard to identify and address areas of opportunity resulting from the workshops. A committed, engaged and motivated workforce is fundamental for a successful TATA Steel."

In the Long Products business, which includes Scunthorpe, the action includes: Looking to reduce waste in personal protective equipment Reducing the number of authorisations needed for expenditure Reduction of overtime: each area has been asked to get overtime approval Identify the base level of overtime required to hit the operations plan.

Source – Strategic Research Institute
GVteD
0
ArcelorMittal (ADR) (MT), Cabot Corp (CBT): This Rare Earth Metal Is More Important Than You Think

by Motley Fool on January 5, 2014

Tantalum is a very rare metal in the Earth’s crust. We use this metal every time we fly, make a phone call, and ride in our cars. Tantalum is used to make electronic parts, heat-resistant glass, automotive catalytic converters, and corrosion-resistant and lightweight metal parts. The list goes on.

There are several mining, processing, trading, and manufacturing companies that source and use tantalum. One of the largest miners of tantalum is Global Advanced Metals, a private company in Australia. Through its alliances this company has a large impact on the rare earth metals market.

The company has interests in Australia, Brazil, and Africa. It was responsible for over 30% of the tantalum produced each year globally and owns one of the largest tantalum mines. The private company is 10% owned by ArcelorMittal (ADR) (NYSE:MT) through its metals and mining trading subsidiary Traxys in Belgium.

Major pubic company competitors include Alkane Resources in Australia, AMG Advanced Metallurgical Group, a Netherlands company, and Avalon Rare Metals Inc (US listing) (NYSEMKT:AVL), a Canadian company.

In 2012 Global idled its Wodgina tantalum mine in Western Australia. Other mine closings and conflict-induced supply disruptions highlight the extreme scarcity of this metal. Without tantalum the world comes to a screeching technological halt.

Why is tantalum so important?
Tantalum is found in trace amounts especially in Brazil, Central Africa, and Australia. It is non-magnetic, heat- and corrosion-resistant, an insulator, and it can hold an electric charge. It is this last property that is so important.

Insulators that can hold an electric charge are called dielectrics. These materials are at the core of a fundamental electronic circuit component called a capacitor. This component is responsible for the ebb, flow, and ultimate control of electricity in circuits ranging from computers to mobile communications.

Without tantalum, the miniaturization of electronic devices, especially in mobile communications, would not have been possible. The tablet I am writing this article on in large part is due to the existence and use of tantalum.





Tantalum and its chemical relative niobium are also used to strengthen lightweight steel. It is this property that is behind ArcelorMittal (ADR) (NYSE:MT)’s recent announcement of a 29 lb car door. This is significant because an over 34% decrease in the weight of four car doors will improve fuel efficiency and reduce carbon footprint.



What happens when there’s a tantalum shortage?
Weaker than expected handheld electronics demand and growing inventories in the tantalum supply chain combine to lower tantalum prices and downstream capacitor and parts markets. These conditions in turn can shut down and idle mines.

There are 150 kilotons of tantalum reserves worldwide. The Wodgina mine has capacity to produce over 3.2 million kilograms, or kg, per year. With the shutdown of the Wodgina mine, tantalum comes from Mozambique, Brazil, Congo, and Rwanda.



In 2012, 30% of the world’s supply of tantalum came from the Wodgina Mine in Western Australia. Citing soft demand and delays in government approvals of mine infrastructure improvements, Global Advanced Mining shut the mine down.

When tantalum mines shut down, the market turns to minerals mined in conflict regions like the Democratic Republic of the Congo. The 2010 Dodd-Frank legislation required the SEC to develop and issue a rule that any companies disclose where and how they procured tantalum, gold, tungsten, and tin.



Tracing minerals is no easy task. As tantalum is extracted at the mine mouth, it gets packaged with sourcing tags. The tag will accompany the tantalum throughout its life until it reaches its final smelter destination. Any company that has “influence” over the tantalum supply chain must file a Conflict Minerals Report.



Supply traceability of tantalum means that tantalum prices should rise over the next two to three years to clear these new market imperatives.

Back to Global Advanced Minerals
Global acquired its Wodgina interests from Cabot Corp (NYSE:CBT) in 2011. When it closed the mine in 2012, Global continued to invest in its African interests. These interests are in countries rife with armed conflict, warlords financing conflict with minerals, and rampant human rights abuses.

Wodgina is a conflict-free inventory available to collateralize any exploration and development opportunity in Africa and elsewhere.

Global uses Traxys to trade and finance tantalum and other rare earths it mines. Traxys is a private company 50% owned by ArcelorMittal (ADR) (NYSE:MT), the steelmaker run by Lakshmi Mittal.

Since 2010, Traxys has had a 20% stake in Global Advanced Metals. With this stake Traxys has access to the mine as inventory it can use as collateral in its trading operations.

Tantalum prices rode high
From 2009 through 2010 tantalum ore prices were level at about $90 per kilogram. Through 2011 they rose to over $200 per kg. At this point Global shut down the Wodgina conflict-free mine.

Tantalum then moved even higher to over $275 per kg. This made exploration and development opportunities more valuable and mining companies like Cabot Corp (NYSE:CBT) began to gear mines up.

The Wodgina mine has ridden a tantalum contango curve. Contango is when current spot prices are lower then current expectations of future spot prices. A trader that bought tantalum at $200 borrowing against tantalum inventory, and immediately sold 1 million kgs forward 180 days at $275 could reap a $75 million gross profit. That inventory is about half a year’s production at Wodgina.



Global’s partnership with Traxys and ArcelorMittal (ADR) (NYSE:MT) will allow Global Advanced Metals to grow revenues during uncertain demand cycles. In turn ArcelorMittal (ADR) (NYSE:MT) has access to key ingredients to its advanced high-strength steel product, critical to improving the demand for steel.



The article This Rare Earth Metal Is More Important Than You Think originally appeared on Fool.com.

Fool contributor Bill Foote has no position in any stocks mentioned. The Motley Fool has no position in any of the stocks mentioned. We Fools may not all hold the same opinions, but we all believe that considering a diverse range of insights makes us better investors. The Motley Fool has a disclosure policy.

Copyright © 1995 – 2014 The Motley Fool, LLC. All rights reserved. The Motley Fool has a disclosure policy.

voda
0
'ArcelorMittal & SBM Offshore gaan het goed doen'

MAANDAG 6 JANUARI 2014, 08:40 uur | 4887 keer gelezen

Beursexperts verwachten wat betreft de Amsterdamse beurs in januari het meest van ArcelorMittal en SBM Offshore. Verder zullen ook Imtech en ING het naar verwachting goed doen de komende maand.

Dit blijkt uit een enquête die Corné van Zeijl van SNS Asset Management heeft gehouden onder ruim 100 beursexperts.

De experts verwachten in januari het meest van ArcelorMittal. Verreweg de meeste van de experts zien Arcelor als topper. Overigens niet alleen in januari gaat het aandeel het volgens hen goed doen, maar ook de rest van het jaar. ArcelorMittal gaat volgens de experts namelijk profiteren van de aantrekkende economie in onder andere Europa.

Floppers van januari

Bij de aandelen die worden genoemd als floppers voor januari staat Heineken bovenaan. De meeste experts verwachten dat januari voor Heineken een negatieve beursmaand wordt. Daarnaast staan ook Air France-KLM, Unilever en Fugro op de lijst met aandelen die het deze maand naar verwachting slecht zullen doen. Veel beursprofessionals verwachten volgens Van Zeijl een winstwaarschuwing voor Fugro.

Meer tips zijn te vinden op de themapagina Beurstips & Handelskansen.

Door Barbara van Cooten

www.belegger.nl/nieuws/2644520/arcelo...
voda
0
TATA Steel may hike product prices

The Hindu reported that TATA Steel may hike the prices of its long product further.

Mr T V Narendran MD of TATA Steel on the sidelines of an event at the Indian Institute of Management-Calcutta said that the company is looking at the possibility of a further hike in product prices.

In the last quarter, the company had hiked prices by INR 2,000 to INR 3,000 a tonne in certain product categories.

Source – The Hindu
voda
0
Indian steel companies to benefit as China cuts exports

Business Standard reported that less than a year ago, several brokerages discontinued actively tracking industrial and cyclical stocks as demand weakened and economic growth plummeted to a 10 year low. These sectors are now seeing a revival of interest as the belief is that a combination of global and local factors will see a revival in demand.

According to Credit Suisse, the cyclical defensives price to book gap in India is the biggest in the region. While not all cyclicals are showing promise in equal measure, analysts are betting big on steel stocks.

Goldman Sachs initiated coverage of 3 steel stocks, TATA Steel, JSW Steel and Steel Authority of India in December as it believes that India will benefit from the improved global steel outlook. The brokerage expects global steel consumption to rise by 4.7% to 1.5 billion tonne in 2014, driven by rising demand from Europe and China.

There are several domestic as well as global factors that are likely to aid the profitability of select steel players in India. For starters, global steel prices have strengthened through 2013. In the fortnight ending December 30th CIS Black Sea export prices gained 0.9% to USD 537.5 per tonne, while hot rolled sheet prices remained intact at USD 559 per tonne. Long product prices in India also strengthened in December. JSW Steel is expected to raise steel prices by INR 700 to 1,000 per tonne, claim analysts.

Even though underlying demand in India remains weak, Mr Goutam Chakraborty of Emkay Global believes that a weaker rupee and some supply constraints have helped domestic steel prices. There’s good news even on the raw material side. In the last week of December, 62% grade iron ore prices have dipped and they are unlikely to see an upward movement in 2014.

India is going to turn into a net exporter of steel in FY14 as higher capacity additions and flat demand will force many companies to look at overseas markets. A weak currency and slowing exports from China are expected to aid Indian exports. Due to environmental concerns, China is slated to cut steel capacity by 8 per cent by FY17. China is estimated to have exported 52 million tonne of steel in 2013 and this is expected to decline by 11 million tonne by FY15 to 41 million tonne. This would be an opportunity for Indian steel makers. With global demand for steel increasing and China cutting exports, Indian steel makers like TATA Steel, JSW Steel and SAIL stand to gain. JSW could be a major beneficiary of this as its capital expansion phase is over and the company is expected generate free cash flows from FY15.

Source – Business Standard
voda
0
Indian iron ore mining mess - Ban on iron ore mining and exports

Business Today reported that top trader MMTC's USD 80 million iron ore export terminal, ready since 2010 has never handled a cargo. Now the company wants to spend USD 16 million to convert the terminal to ship coal.

Bans on iron ore mining and exports in top producing states of Karnataka and Goa have choked the industry so hard that MMTC is 1 of many firms exiting. Even if efforts to fully lift the bans make it past the many bureaucratic and legal hurdles, iron ore miners do not expect complete resumption of production until late 2014.

The bans, put in place as the government tried to clamp down on illegal mining, have cut the iron ore exports by around 85% or 100 million tonne, over the past 2 years. They have also reduced foreign exchange earnings by more than USD 17 billion in the same period, according to the Federation of Indian Mineral Industries.

The structural shift in India's iron ore industry could be a blessing for other suppliers, as demand growth from top market China slows and Australian miners Rio Tinto and BHP Billiton ramp up output. It will also make it harder for India to regain its spot as the world's No.3 exporter of the steelmaking raw material.

Mr R K Bansal, a secretary general at FIMI said that "It's pretty evident that there's lasting damage to the industry. But if the government of the day at the state and central level, as well as other authorities, stick their neck out and take decisions then this paralysis can go."

Mining in Goa was banned in September 2012, freezing shipments that reached about 50 million tonne in the 2010 to 11 fiscal year. In neighbouring Karnataka, where the ban started in 2011, exports remain frozen even though it was lifted in April. In both states, the bulk of mining was done by private companies, which were accused of mining outside lease areas and in excess of set limits.

MMTC was banking on business from Karnataka when it invested along with partners Sical Logistics Ltd and L&T Infrastructure Development Projects in an iron ore terminal in Ennore Port in Tamil Nadu.

Mr SM Babu GM at MMTC's Chennai office said that "We think that at least in the next five to six years there will be no exports of iron ore. Instead the JV company hopes to tap growing demand for coal fired power plants in Tamil Nadu.”

Source - Business Today
voda
0
TATA Steel looking to cut Scunthorpe workers overtime

Scunthorpe Telegraph reported that action has been taken by senior managers on the TATA Steel works in Scunthorpe after an employee survey called for more face to face communication.

The survey was conducted across Tata Steel Europe to hear first-hand views on leadership in the company.

A company spokesman said that "The executive committee members gathered dozens of valuable comments and ideas during the employee engagement workshops across TATA Steel Europe.”

Source - www.scunthorpetelegraph.co.uk
voda
0
US Steel sees investment upgrade

KeyBanc Capital Markets upped US Steel to a buy from a hold and upped its earnings per share forecast. KeyBanc said higher prices and lower cost of raw material should help the Pittsburgh-based manufacturer.

Source - Bizjournals.com
[verwijderd]
0
The U.S. Steel Industry is Not as Healthy as it Seems
By Bob Ciura | More Articles
January 6, 2014 | Comments (0)

The U.S. steel industry was on the brink of collapse during the heart of the financial crisis. As the U.S. economy recovered in the years since the Great Recession, it seemed entirely plausible that the domestic steel industry would benefit right alongside. While the U.S. steel industry is no longer on the brink of collapse, it still faces a great deal of challenges.

At the same time, if you judged the health of the steel industry solely by steel companies' stock price performances over the last few months, you would come to a vastly different conclusion. Major steel producers based in the United States, including U.S. Steel (NYSE: X ) , and Nucor (NYSE: NUE ) , have seen their share prices soar over the past few months.

But investors who understand that short-term stock price movements do not necessarily predict future underlying performance have plenty of reasons to be cautious about U.S. steel producers in the months ahead. Instead, here's why you should favor international competitor ArcelorMittal (NYSE: MT ) .

Business trends not as good as stock prices imply
Despite what rising stock prices might imply, it's important to keep tabs on the underlying performance of the businesses involved. Investors are not always rational, and there is often a disconnect between a company's stock price and its real business fundamentals. This is exactly what seems to be playing out for the U.S.-based steel companies.

Shares of U.S. Steel are up a whopping 40% just since October 3. However, consider that U.S. Steel's business has deteriorated for much of the year. It recorded a $1.6 billion operating loss through the first nine months of 2013, but booked a $242 million operating profit in the same period in 2012.

Meanwhile, Nucor's core metrics are worsening as well. It is seeing severe pricing weakness, which took its toll on the company's results in 2013. Nucor suffered a 6% drop in average sales price per ton through the first nine months of the year, along with a 5% drop in sales and 14% lower earnings.

Put simply, it does not appear that the over-arching concerns facing the steel industry in the United States have subsided. You wouldn't know it by their share prices, though. At the same time, one international steel producer has seen its business improve recently.

That would be ArcelorMittal, which kept its head above water in the third quarter, and has a much better internal outlook going forward than its American rivals. ArcelorMittal grew earnings before interest, taxes, depreciation, and amortization, or EBITDA, by 24% in the third quarter versus the same quarter in 2012. Going back further, steel production and shipments are both up over the first nine months, which drove its outperformance.

U.S. steel makers' disappointing future outlooks
Unfortunately, questionable recoveries in the markets most important to the U.S. steel industry mean U.S. Steel and Nucor will see considerable challenges in the year ahead. Neither company sees gang-busters growth in store in the near future, mainly because the commercial construction industry in the U.S. is not yet fully healthy.

U.S. Steel isn't likely to show significant progress in the upcoming quarter. Management expects relatively tepid results in its two core segments. Its flat-rolled business should just break-even, and its tubular segment is not likely to grow in the current quarter, year over year. Meanwhile, Nucor warned investors that fourth-quarter earnings are expected to decline as opposed to the same quarter last year, due to planned outages.

By contrast, ArcelorMittal believes it will grow underlying profitability for full year 2013, driven by improving core metrics across the board. Steel shipments are expected to increase 1%-2% for the full year. Iron ore shipments should rise 20%, and the company expects to improve margins due to its cost-savings initiatives.

Conclusion: ArcelorMittal beats its U.S. rivals

Interestingly, ArcelorMittal has actually seen its core underlying business improve in the most recent quarter, implying that its recent stock price gains are much more believable than U.S. Steel's or Nucor's.

While U.S. Steel and Nucor have seen their shares perform strongly in the past few months, investors should not be convinced, due to their ongoing struggles and dour outlooks. At the same time, ArcelorMittal's recent performance and its full-year outlook should give investors some confidence that it is on a smoother road to recovery.
GVteD
0
ArcelorMittal (ADR) (MT) Restarts Harriman Plant

by Zacks Investment Research on January 6, 2014
www.nextiphonenews.com/2014/01/arcelo...






Steel giant ArcelorMittal (ADR) (NYSE:MT) has decided to reopen its Harriman, Tenn.-based long product finishing facility. The plant was closed in 2011 amid poor market conditions.

ArcelorMittal expects the facility to be fully operational by April 2014. It will hire 61 new employees over the next couple of years. All employees at the Harriman facility will undergo extensive safety orientation and job training to ensure the safety of the workforce and the workplace.

ArcelorMittal (ADR) (NYSE:MT)

The Harriman plant gets the delivery of steel billets from ArcelorMittal (ADR) (NYSE:MT)’s LaPlace, La. plant. The metal is reheated and rolled into light structural shapes and merchant bars, for use in the construction market.

With the restart of the facility, ArcelorMittal is expected to improve its extensive product portfolio by producing one-to three-inch angles and one- to four-inch flats. This development is expected to uplift both ArcelorMittal and the Harriman region by serving as a pillar of the strength and resilience to the American manufacturing and the U.S. steel industry.

United Steelworkers and the local and state government have extended their support to this restart.

ArcelorMittal (ADR) (NYSE:MT) posted net loss of $0.2 billion or 12 cents per share in the third quarter of 2013, narrower than the net loss of $0.7 billion or 42 cents a year ago. Losses reduced year over year on the company’s cost management initiatives.

Barring one-time items (excluding impairment charges), loss was 6 cents per share. It was below the Zacks Consensus Estimate of a loss of 7 cents per share.

Revenues declined 0.4% year over year to $19.6 billion in the reported quarter but nominally beat the Zacks Consensus estimate of $19.5 billion. Sales declined due to lower average selling prices. Shipments rose 6% year over year to 21.1 million metric tons.

ArcelorMittal (ADR) (NYSE:MT) reiterated its outlook for earnings before interest, taxes, depreciation and amortization (EBITDA) at above $6.5 billion for 2013. The company expects increase in steel and marketable iron ore shipments, and the realized benefits from Asset Optimization and Management Gains initiatives to contribute to its profitability. ArcelorMittal predicted that Asset Optimization will deliver annualized savings of $1 billion, the full impact of which will be realized in 2014. ArcelorMittal estimates capital expenditures of roughly $3.7 billion in 2013.

ArcelorMittal (ADR) (NYSE:MT) retains a Zacks Rank #1 (Strong Buy).
voda
0
Indian steel consumption growth is almost nil in last 9 months

According to latest release from Indian steel ministry’s Joint Plant Committee, India’s total steel consumption grew by just 0.5% YoY to 53.789 million tonnes during April-December 2013 as against 53.52 million tonnes in the first nine months of 2012-13.

Consumption of carbon steel during the current year amounted to 51.22 million tonnes up by 2.2%YoY while alloy steel consumption dipped by massive 25% YoY to 2.547 million tonnes

As per JPC data, production for sale of the total finished steel at 60.446 million tonnes registered a growth of 5.2% during the April-December

Import showed a southward trend at 4.099 million tonne during the period down by 29.2% YoY as against 5.790 million tonnes in april-December2012. However exports were up by 9.5 per cent to 4.136 million tonnes as against 3.778 million tonnes in April-December 2012

The production of pig iron during April-December2013 slid by 3.3% YoY to 4.451 million tonnes while the consumption reduced by 10.3% YoY to 3.931 million tonnes

Source – Strategic Research Institute

voda
0
TATA Steel measures to reduce Port Talbot pollution are on track

According to TATA Steel, measures to reduce pollution in Port Talbot are on track. The steel company is currently working with Natural Resources Wales to carry out a series of actions to reduce dust.

It followed complaints from residents in July who experienced an increase in the pollution.

In November, Gavin Bown for Natural Resources Wales said Tata Steel needed to complete the actions by the end of January.

A TATA Steel spokesman said they were on track to complete them. He said that "Last year working with Natural Resources Wales, we agreed to do two things the first was to submit and carry-out a short term action plan, which we did. The second was to provide a second, long term action plan and demonstrate that we are carrying it out too. We are consistently working together with Natural Resources Wales on an ongoing basis, we have shared and discussed our proposals with them."

As well as reviewing and evaluating TATA’s response, Natural Resources Wales has been consulting the public for their opinions.

Following the consultation the organisation will change the permit held by TATA to include the new limits set by the directive.

One of several initiatives TATA Steel has used to tackle the dust problem has been to install a GBP 800,000 wheel wash for the heavy vehicles that carry raw materials onto the site.

The facility aims to reduce fugitive dust emission from the fleet of heavy vehicles operated by TATA Steel and its suppliers.

Source - www.southwales-eveningpost.co.uk
voda
0
Indian steel market gropes for stability as consumption plummets

Indian steel market remains caught in dilemma of its own making at the end of Q3. Unlike other countries the Indian Financial Year ends in March and the by December end the verdict remains indicative rather than conclusive.

Not surprisingly the first 3 Quarters reflected the morose in market as steel consumption grew by just 0.5 per cent to 53.789 million tonnes. With yet another 3 months to go before the year closes results are not expected to be trend reversal though marginal improvement is not ruled out.

Reeling under credit squeeze all the core sectors of Indian economy has groveled without any growth thereby stemming consumption. Across the sectors viz., construction, white good sector, auto etc consumption has declined.

The consumption of finished steel, a key indicator of the health of an economy, was at 53.52 million tonnes in the first eight months of the last fiscal, 2012-13.

Indian economy grew by 4.8 per cent during July-September quarter. It had hit a decade's low of 5 per cent in 2012-13 due to poor performance in the farm, manufacturing and mining sectors.

Though the consumption growth in December was better at 1.5 per cent, it saw a 7 per cent decline compared to November this year, indicating that the base level demand conditions continued to remain weak during the current fiscal so far.

As the economy enters in Q4 market is hopeful of an improved performance with annual projects slated for completion before 31st March. Producers and traders are taking solace in increased cost viz., scrap and iron ore levels to push for price buoyancy unconfirmed reports about pick up in buying in Q3.

Recent price hike of INR 1000-1500 per tonne by steel mills has provided a cue for improved market sentiments. However a lot will depend on the credit easing giving liquidity to propel demand. Enhanced export up by 9.5 per cent to 4.136 million tonnes has led to shortage in domestic market providing the straw.

Source - Strategic Research Institute
voda
0
Indian steel ministry target to achieve 300 million tonne

Financial Express reported that with a decade to meet the ambitious target of producing 300 million tonne of steel as set by Prime Minister Mr Manmohan Singh, the steel ministry has roped in the services of Boston Consulting Group to conduct an independent analysis of the challenges and bottlenecks hampering steel manufacturers and the industry.

Simultaneously, the ministry has also initiated an internal study to assess the current scenario, regulatory and policy hurdles and the overall challenges being faced by steel producers. Both studies are expected to be over in 3 months. Earlier this year, the PM had outlined a target for the ministry to produce 300 million tonne of steel by 2025, which will be almost 3.5 times the current level of 90 million tonne.

The country's largest steel producer, SAIL, has also charted out Vision 2025, in line with the target. During the period, the company intends to reach a production capacity of 50 million tonne per annum from the current 15 million tonne. Mr CS Verma chairman of SAIL said that “We plan to take up our present capacity of 15 million tonne to 19 million tonne by the end of this fiscal.”

The ministry, in its mid year plan review, has identified iron ore availability as one of the challenges. It requires 1.5 to 1.6 million tonne of iron ore to produce 1 million tonne of steel. Over the last few years, there has been a decline in production and exports of iron ore. The production has come down from 219 million tonne in 2009 to 10 to 140 million tonne in 2012 to 13.

The steel industry registered growth of 13.3% and 9.9% during financial year 2010 and 2011, respectively, but Indian steel consumption grew at only 5.5% during 2012 on the back of a slowdown in demand from key consuming industries, construction, capital goods and automobiles.

Source – Financial Express

voda
0
Worst ever crisis looms over steel industry - SWFI leader

Business Line quoted Mr P K Das general secretary of Steel Workers’ Federation of India as saying that with China turning into net exporter of steel, the Central government must introduce heavy anti dumping duties to safeguard the interest of the domestic steel industry.

Mr Das who was here to attend the 2 day annual conference of Steel Plant Employees Union, said that as the threat of cheap import eating into Indian market was looming large, it was high time for the powers-that-be to initiate policy changes to prevent a severe crisis.

He said that the Indian steel industry, already hit by recession, would face a worst ever crisis unless the government initiates corrective measures like slapping steep anti-dumping duties, imposing a ban on iron ore exports and reducing taxes like Customs Duty and Central Excise to reduce production cost of domestic manufacturers.

He said that “China has a production capacity of 820 million tonne. The production level is now maintained at 680 to 760 million tonne whereas India’s steel production capacity is around 90 million tonne. China used to be a net importer till 2 years ago. As China is also experiencing fall in demand for steel due to saturation in urban infrastructure, it has decided to shift its focus to people related investments such as rural sector and lifestyle change. Apart from China, South Korea, which used to export its surplus steel to China, was now looking at alternative markets like India.”

Stating that the production cost of Steel Authority of India Limited and Rashtriya Ispat Nigam Limited was very high as they were dependent on iron ore from National Mineral Development Corporation, the government should initiate allotment of captive mines to give them immunity from shrinking profit margins.

He said that “As the private lobby was very strong and it could do what public sector industries could not do, the government was also encouraging disinvestment of public sector units like RINL and SAIL.” To a question, Mr Das said that this was probably the main reason for lack of raw material security for public sector steel producers.

He said that there was an urgent need to raise per capita consumption of steel in India as it was in the range of 42 to 44 kg against world average consumption of 230 kg.

Source – Business Line
voda
0
Vale suspends iron ore shipment

Brazilian mining giant Vale says it has suspended with immediate effect force majeure on iron ore shipments contracts.

The world's main producer had declared force majeure limiting its liabilities owing to circumstances beyond its control on December 27 after bad weather in Brazil's southeast disrupted operations and shipments.

In a statement on Monday, Vale said it had limited the impact on shipments to 2.5 million metric tonnes after an original estimate of between three and four metric tonnes.

The company calculated that up to 1.3 million tonne can be potentially recovered in the first quarter of 2014.

The worst rains in 90 years affected operations particularly in the state of Espirito Santo, where 23 people died and thousands more had to leave their homes.

Source – Ninemsn
max21
0
corporate.arcelormittal.com/news-and-...

Royal Mint presents ArcelorMittal Distribution Solutions Birmingham with Business Excellence Award

ArcelorMittal’s Distribution Solutions site in Birmingham, UK has been awarded the 2013 Business Excellence Award by our customer, the prestigious Royal Mint - the body permitted to manufacture, or mint, coins in the United Kingdom.
The award recognised the company achieving the Ethical and Social Accountability 8000 (SA8000) standard.
The majority of the 400 tonnes of slit coil steel supplied each month is manufactured into the UK’s five pence and 10 pence coins. However, some of the tonnage is also manufactured into other currencies for coinage around the world. The steel supplied to The Royal Mint is hot-rolled, pickled and oiled (HRPO) DD13 in 2.50mm – 3.00mm thickness (sourced from ArcelorMittal Gent, Belgium).
As a result of this award, Distribution Solutions Birmingham will supply more steel to The Royal Mint for 2014, but the achievement also allowed our company to strengthen the long term relationship with the famous coin manufacturer.
Advancing the human rights of workers
Just over 18 months ago The Royal Mint set out on a programme, working with their major supplier base, to improve performance by developing the supply chain and bringing it closer to them. One of the fundamental principles they require their suppliers to fulfil is the focus on social and ethical responsibility.
The SA8000 standard entails a management systems approach, by setting out the structure and procedures that companies must adopt in order to ensure that compliance with the standard is continuously reviewed. To gain this standard, policies and procedures that protect the basic human rights of workers had to be in place.
The nine elements in the SA8000 standard are:
1- Child labour
2- Forced labour
3- Health and safety
4- Freedom of association and right to collective bargaining
5- Discrimination
6- Disciplinary practices
7- Working hours
8- Compensation
9- Management system
Image 1: Ian Thomson (right), senior sales, being presented the award by Adam Lawrence, The Royal Mint CEO
voda
1
Australia Port Hedland iron ore exports to China rise in Dec

Reuters - UK Focus – 22 hours ago

SYDNEY/PERTH, Jan 7 (Reuters) - Iron ore exports to China from Australia's Port Hedland, which handles about a fifth of the global seaborne market for the steel-making raw material, rose 19.4 percent in December from the same month a year ago.

Shipments to China amounted to 24.16 million tonnes in December compared to 20.23 million last year.

The December iron ore exports to China were also up from the 22.3 million tonnes recorded in November 2013, data from the Port Hedland Port Authority showed on Tuesday.

The December figures brought total 2013 exports to China to a record 256.06 million tonnes against 193.4 million in 2012.

Shipments to Japan fell to 2.07 million tonnes from 2.64 million tonnes; shipments to South Korea dropped to 2.02 million tonnes, down from 2.24 million tonnes.

Overall, iron ore exports were 29.46 million tonnes versus 26.0 million a year ago and 28.1 million tonnes in November.

The spot price for iron ore has defied analysts' forecasts of a fall in recent months and was assessed at $134.80 a tonne on Monday versus a low for last year of just over $110 per tonne in late May.

Port Hedland is used by BHP Billiton (NYSE: BBL - news) , Fortescue Metals Group and Atlas Iron (Frankfurt: A0DNWE - news) to ship iron ore cargoes.

The Port Hedland figures do not include iron ore shipments by Rio Tinto (Xetra: 855018 - news) , Australia's biggest producer.

Rio Tinto is expanding its export capacity by a third to 290 million tonnes from the Indian Ocean ports of Dampier and Cape (LSE: CIU.L - news) Lambert south of Port Hedland.

All three ports were closed on the last few days of 2013 due to a passing cyclone but have since reopened.

Brazil is the world's second-largest exporter of iron ore behind Australia, supplying about 30 percent.
[verwijderd]
1

Zie onderstaande post van Voda:

quote Voda:

…..
'O ja, die onthulling van het jaar nog. Dat sloeg dus niet op het bovenstaande maar op iets anders!
Nu was ik al een productieve poster als voda, in 2 jaar en 8 maanden ruim 25,588 postings (en ruim 5,745 ab’s), de waarheid is nog een factortje erger!

De waarheid is, en dat kan ik nu wel vertellen aangezien ik er toch mee stop, dat ik er nog een tweede alias bij had! Sterker nog, ik ben eigenlijk de alter ego van een poster die iets eerder begonnen is. Om precies te zijn 3 augustus 2005.
Zijn alias naam: h.vdbilt
!! Jawel, de nummer 1 poster met de meeste posts en meeste ab’s achter zijn naam (ruim 26,340 posts en 5,840 ab’s)".

het hele verhaal: www.iex.nl/Forum/Topic/1170396/1/Defi...

Daarnaast heeft ie nu een nieuw alterego waarmee hij naast Voda actief is.

Valt me van je tegen Voda. Maak gewoon schoon schip anders blijft het je achter volgen
35.173 Posts, Pagina: « 1 2 3 4 5 6 ... 41 42 43 44 45 46 47 48 49 50 51 ... 1755 1756 1757 1758 1759 » | Laatste
Aantal posts per pagina:  20 50 100 | Omhoog ↑

Meedoen aan de discussie?

Word nu gratis lid of log in met uw e-mailadres en wachtwoord.

Direct naar Forum

Detail

Vertraagd 25 apr 2024 17:35
Koers 23,540
Verschil -0,100 (-0,42%)
Hoog 23,690
Laag 23,170
Volume 2.802.569
Volume gemiddeld 2.461.865
Volume gisteren 2.185.626

EU stocks, real time, by Cboe Europe Ltd.; Other, Euronext & US stocks by NYSE & Cboe BZX Exchange, 15 min. delayed
#/^ Index indications calculated real time, zie disclaimer, streaming powered by: Infront